Pneumatic Line components / Flow control valves

Line components・Flow control valves

Speed Controllers

PDF（Catalog）--
  • Speed Controllers
  • Speed Controllers
The speed controller is installed on actuators such as cylinders and air motors,and controls the operating speed of the actuator by adjusting the flow through the actuator.

■SC6/SC213　Standard type（Port size：Rc1/4 , Rc3/8 , Rc1/2 , Rc3/4 , Rc1 , Rc1 1/4 , Rc1 1/2 , 50A Flange）
■SC6S/SC213S　Corrosion-resistant type（Port size：Rc1/4 , Rc3/8 , Rc1/2 , Rc3/4 , Rc1 , Rc1 1/4 , Rc1 1/2 , 50A Flange）
■SC6F　Fine-tuning type（Port size：Rc3/8）
Model code Standard type
（Corrosion-resistant type）		 SC6-02
（SC6S-02）		 SC6-04
（SC6S-04）		 SC6-06
（SC6S-06）		 SC6-08
（SC6S-08）		 SC213
（SC213S）
Port size 8A 10A 8A 10A 15A 15A 20A 20A 25A 32A 40A 50A
Flange
Rc1/4 Rc3/8 Rc1/4 Rc3/8 Rc1/2 Rc1/2 Rc3/4 Rc3/4 Rc1 Rc1 1/4 Rc1 1/2
Effective sectional area Max.controlled flow 10mm2 25mm2 32mm2 72mm2 150mm2 170mm2 310mm2 360mm2 1050mm2
Free flow 12.5mm2 30mm2 38mm2 90mm2 152mm2 172mm2 210mm2 260mm2 840mm2
Operating pressure 0.05～0.7MPa
Proof pressure 1.05MPa
Cracking pressure 0.05MPa以下
Operating temperature General purpose：-20～60℃　Heat-resistant：5～100℃　Freeze-resistant：-40～45℃ 5～60℃
Mass 0.18kg 0.17kg 0.36kg 0.8kg 3.3kg 4.0kg 27.5kg
Model code Fine-tuning type SC6F-02
Port size 10A
Rc3/8
Effective
sectional area		 Max.controlled flow 0.8mm2
Free flow 12.5mm2
Operating pressure 0.05～0.7MPa
Proof pressure 1.05MPa
Cracking pressure 0.05MPa or less
Operating temperature General purpose：-20～60℃　Heat-resistant：5～100℃　Freeze-resistant：-40～45℃
Mass 0.18kg
●Refer to catalog for details.

Omnidirectional, Screwed Speed Controllers

PDF（Catalog）--
  • Omnidirectional, Screwed Speed Controllers
This speed controller can be mounted directly on air cylinders.It is a compact,L-shaped design that can be connected to the pipe at any angle（360°）
and is suitable for use in a meter-out system.

■SC7　Standard type（Port size：Rc1/8 , Rc1/4 , Rc3/8）
Model code SC7-06A SC7-08A SC7-10A
Port size 6A 8A 10A
R1/8・Rc1/8 R1/4・Rc1/4 R3/8・Rc3/8
Effective
sectional area		 Max.controlled flow 5.5mm2 8.3mm2 14.0mm2
Free flow 3.8mm2 11.0mm2 16.0mm2
Operating pressure Max. 0.7MPa
Proof pressure 1.05MPa
Operating temperature 5～60℃
Number of turns of needle valve available 8 turns
Mass 0.04kg 0.07kg 0.1kg
●Refer to catalog for details.

Omnidirectional, One-Touch Couplers Speed Controllers

PDF（Catalog）--
  • Omnidirectional, One-Touch Couplers Speed Controllers
  • Omnidirectional, One-Touch Couplers Speed Controllers
  • Omnidirectional, One-Touch Couplers Speed Controllers
The speed controllers are available in two types,normal standard type with a freely rotating body,and a flexible type that permits tube connection at any angle.
An extensive variety of pipe diameters（male thread sizes）are provided,ranging from the miniature type（M3-Rc1/8）to standard type（M5-Rc1/2）.

■Standard miniature type（Port size：M3×0.5 , M5×0.8 , Rc1/8）
■B（Flexidle）miniature type（Port size：M3×0.5 , M5×0.8 , Rc1/8）
■Standard type（Port size：M5×0.8 , Rc1/8 , Rc1/4 , Rc3/8 , Rc1/2）
■B（Flexidle）type（Port size：M5×0.8 , Rc1/8 , Rc1/4 , Rc3/8 , Rc1/2）
Model code Standard miniature type M4R M6R
B（Flexidle）miniature type MB4R MB6R
Applicable tube diameter φ4 φ6
Port size M3×0.5 M5×0.8 R1/8 M5×0.8 R1/8
Material for the body Polyacetal・Metal
Operating pressure Max.0.7MPa
Proof pressure 1.05MPa
Operating temperature 5～60℃
Applicable tube material Polyurethane , nylon , polyethylene , PTFE
Model code Standard type Material for
the body		 Resin 4R 6R 8R 10R 12R
Metal 4 6 8 10 12
B（Flexidle）type Material for
the body		 Resin B4R B6R B8R B10R B12R
Metal B4 B6 B8 B10 B12
Applicable tube diameter φ4 φ6 φ8 φ10 φ12
Port size M5×0.5 , R1/8 M5×0.5 , R1/8 , R1/4 R1/8 , R1/4 , R3/8 R1/4 , R3/8 , R1/2 R3/8 , R1/2
Operating pressure Max.0.7MPa
Proof pressure 1.05MPa
Operating temperature 5～60℃
Type of flow system Meter-in type・Meter-out type
Applicable tube material Polyurethane , nylon , polyethylene , PTFE
●Refer to catalog for details.
PAGE TOP